Morning
Starting the backpanel drawing for the new welder plc. I started with the exact size of panel that would go into EBW 2 and 3. The only problem with that is not every welder has the same panel. I cracked open one to find that the layout is different in every way. We had to move the staircase in front of five to get at that panel with is completely different from one, two, and three. Besides that, the plc will have to go in sideways to two and three to make everything fit. It's starting to get a little nuts.
Afternoon
I was trying to find information about power needs for the plc. I don't really know what kind of DC supply (if any) will need to go in the cabinet. It really depends on the analog in module. I've been hunting for documents on the total power needed for that card slot. There was also an issue out on the HPM that I sat in on and tried to help with. There are some alignment issues with the new die block and the pins on the press. They got enough of a fix to get it pressing at least.
No comments:
Post a Comment