Morning
I continued to work on the drawings for the new back panel in the old welders. I found that I will need a 24V supply to power the Ethernet switch. I also put in a side view to indicate the clearance in the panel. When Tony got back from across the street, we took a look at the HPM program and made the two updates that they were requesting, but couldn't check them because there wasn't an operator running at the time.
Afternoon
Work on EBW4. Started checking I/O and getting the reset button to finally function. There was a lot of checking the Kepco's to see if they were working and tuned. Mostly it was running from the shack to the gun cage back up to the high voltage cage and around again. At least the two SCR panels were working today.
No comments:
Post a Comment