Morning
I needed to get the brake drawings done. I finished up the panel drawing, then I made the schematic drawing. Once I had those finalized and printed, we took some of the junk in the office down to Jim's shop. I asked him what he thought. He didn't care too much, but he said that would work. I now needed to get the plans to Ladd. He wasn't in his office so I'll have to try later. I took the truck across the street to leave the box of trigger boards in the storage room.
Afternoon
I started the afternoon by taking a look at the list of Mecop knowledge points. I wanted to get a little better with PID's before I cross that one off, so I read up online about them. It was all stuff I already knew, but it doesn't hurt to see again. I then started to scope out what is left on the welder project. I need to finish the I/O drawings before I can send out a materials list for a quote. I also laid out other things that are yet to be done. When I talked to Tony, he has a lot of numbers that he wants in this budget including a large part of the trending costs. I will have to get all that rounded up, but first I want to get the materials out to North Coast.
No comments:
Post a Comment